Xebec Soft Abrasive Ceramic Stones
Soft Contact
XEBEC Soft Ceramic Stones
XEBEC Soft combines abrasive fibers with a soft rubber bond. The stone conforms better to the surface and allows for a more delicate contact, useful when you need to control action aggressiveness.
Features
When to choose Soft
Soft rubber binder for a more delicate and adaptable surface contact.
- Soft rubber binder.
- Adaptable contact following surface geometry.
- 2×6×100 mm flat stick.
- Ø 3×100 mm round rod.
Clear sizes
Main formats, part numbers, and grits
| Size / Format | Part numbers or range | Equivalent grits |
|---|---|---|
| 2×6×100 Stick | BS-2006M | 1200 |
| Ø 3×100 Round Rod | PBS-30M | 1200 |
Full details of all combinations are available in the GDS catalog. The link opens the most relevant page directly.
Working method
Practical guidelines
Use it for control
Suitable when contact delicacy matters more than maximum aggressiveness.
Follow the geometry
The soft binder helps the stone conform better to complex profiles and surfaces.
Test it first
This is a specialized range: sampling helps quickly verify behavior on the workpiece.
GDS Catalog
Part numbers and availability
Check the section dedicated to Soft in the GDS catalog.
Original catalog
XEBEC technical deep-dive
Official descriptions, operating instructions, and international range.
FAQ
Questions about Soft
Is Soft just a finer Meister Finish?
Not simply: the main difference is the soft rubber binder, which alters surface contact.
Which formats are available?
2×6×100 mm flat sticks and Ø 3×100 mm round rods, both in 1200 equivalent grit.
When is it best recommended?
When a gentler, more adaptable contact is required on complex or sensitive surfaces.
Other XEBEC series
Compare alternatives
Want to test it on your application?
Provide details on material, hardness, geometry, tool used, and required finish. GDS can assist in selecting the right size and grit.
