Xebec Diamond abrasive Ceramic Stones
For 57+ HRC
XEBEC Diamond Ceramic Stones
XEBEC Diamond contains diamond particles and is engineered for materials harder than 57 HRC, such as hardened steels, SKD, STAVAX, and carbide. A specialized series to choose based on true workpiece hardness.
Features
When to choose Diamond
Diamond-infused series for extremely hard materials, hardened steels, and carbide.
- For materials over 57 HRC.
- Flat sticks in three widths.
- Ø 3 mm round rod for profiles and localized areas.
- 200–1200 equivalent grits.
Clear sizes
Main formats, part numbers, and grits
| Size / Format | Part numbers or range | Equivalent grits |
|---|---|---|
| 1×4×100 | DM-1004M / DF-1004M / DS-1004M / DU-1004M | 200 / 400 / 800 / 1200 |
| 1×6×100 | DM-1006M / DF-1006M / DS-1006M / DU-1006M | 200 / 400 / 800 / 1200 |
| 1×10×100 | DM-1010M / DF-1010M / DS-1010M / DU-1010M | 200 / 400 / 800 / 1200 |
| Ø 3×50 / Ø 3×100 | PDF-30S / PDF-30M | 400 |
Full details of all combinations are available in the GDS catalog. The link opens the most relevant page directly.
Working method
Practical guidelines
Check hardness
Diamond makes sense when the material is truly over 57 HRC or exhibits high abrasion resistance.
Choose shape and width
Sticks for flat surfaces and slots; Ø 3 mm round rod for spots, radii, and profiles.
Avoid excessive grit skips
Even with diamond, grit progression must eliminate scratches from the previous phase.
GDS Catalog
Part numbers and availability
Check the section dedicated to Diamond in the GDS catalog.
Original catalog
XEBEC technical deep-dive
Official descriptions, operating instructions, and international range.
FAQ
Questions about Diamond
Is it the right series for hardened STAVAX?
Yes, XEBEC recommends Diamond for materials over 57 HRC, including hardened steels like STAVAX and SKD.
Why does it contain diamond?
Diamond provides cutting capacity on materials where standard ceramic would be less effective.
Is it also available in round format?
Yes, the GDS catalog includes the Ø 3 mm round rod in 400 grit, available in 50 mm and 100 mm lengths.
Other XEBEC series
Compare alternatives
Want to test it on your application?
Provide details on material, hardness, geometry, tool used, and required finish. GDS can assist in selecting the right size and grit.
